WP Plaster ECO – DAVCO

Davco WP Plaster ECO provides effective integral waterproofing by forming a hydro-phobic layer within the plaster. It is easy to use and provides superior bonding to concrete substrate and brickwork surfaces.

Davco WP Plaster ECO is formulated with Ordinary Portland Cement, approved recycled content, graded sand and chemical additives to provide a durable waterproof plaster for both internal and external plastering.

USES

  • Davco WP Plaster ECO is an extremely versatile material.
  • It is highly recommended for bedding, pointing brickwork and blockwork, backing and bedding for wall tiles, and is suitable for both internal and external plastering.
  • Davco WP Plaster ECO can be used for all types of concrete substrate, lightweight autoclaved aerated blocks, brickwall and blockwall etc., whenever a waterproof plaster system is needed.

ADVANTAGES

  • An environmentally friendly building product.
  • Premixed to ensure good consistent quality.
  • Prepacked for convenience in handling.
  • Mixing and application made easy.
  • Eliminates all surface crack lines.
  • High bonding strength.
  • Good weather resistance and high durability.
  • Waterproof plaster provides a continuous and permanent barrier to water.
  • Excellent vapour resistance.

Plastermix (Type I) (Quicseal 608) – QUICSEAL

QUICSEAL 608 PLASTERMIX (Type I) is a specially formulated acrylic latex admixture to be mixed with cement and sand to improve the quality of screeds and renders.

QUICSEAL 608 improves the cohesion and adhesion strength of screeds and renders. Once cured, the screeds and renders are resistant to water, mild chemical and weathering effects.

Green Thermal Plaster – UZEN

Uzen Thermal Plaster is an eco-friendly high performance substitute material for cement mortar plaster commonly used in buildings. The Thermal Plaster effectively reduces the amount of solar heat gain into the building and results in significant costs savings with the reduced mechanical cooling required. Ease of application on different wall surfaces and great for usage in all conditions. This product provides a low cost and effective solution towards enhancing the energy efficiency of buildings and providing cooler indoor environment.

Easi Plaster ECO – EMIX

EASI PLASTER is a specially blended premixed thin plaster for finishing walls and ceilings. It is a cement-based and water resistant plaster which can be used in interior and exterior conditions. Suitable for concrete, lightweight concrete blockworks and rendered surfaces but not on painted surfaces. Not suitable as a spray able plaster. The hardened plaster surface can be painted or wallpapered.

Hard Finish Wall Plaster – APLAS

APLAS Hard Finish Wall Plaster is a durable, high quality wall plaster specially formulated for application on brick wall and block wall rendering.

Fine Plaster ECO – DAVCO

Davco Fine Plaster ECO is an environmentally friendly cementitious plaster comprising of Ordinary Portland Cement, graded sand, approved recycled material and chemical additives.

Davco Fine Plaster ECO is specially formulated for better adhesion strength and reduced shrinkage cracks, giving superior bonding to concrete substrate and brickwork surfaces.

Davco Fine Plaster ECO is approved by the Eco-labelling authority in Singapore as a sustainable building material.

USES

  • Davco Fine Plaster ECO is an extremely versatile material, highly recommended for bedding, pointing brickwork and blockwork, backing and bedding for wall tiles, and for both internal and external plastering.
  • Davco Fine Plaster ECO can be used for all types of concrete substrate, lightweight autoclaved aerated blocks, brickwall and blockwall.

ADVANTAGES

  • Premixed to ensure good consistent quality.
  • Prepacked for convenience in handling.
  • Mixing and application made easy.
  • Eliminates all surface crack lines.
  • High bonding strength.
  • Good weather resistance and high durability.

Plaster Sand

Plaster sand is with medium coarseness, in between Masonry Sand and Concrete Sand.

It is ideal for plastering jobs as well as for making cement using cement/sand/gravel mix.

Cementitious Waterproofing (K11 Panel Pruf) – DAVCO

Davco K11 Panel Pruf is a flexible two-part, polymer-modified cementitious waterproofing system for protection against the ingress of water. After curing, Davco K11 Panel Pruf forms a fully bonded, tough and yet flexible, seamless waterproofing membrane that can accommodate slight movement of structure. It can be used as a repair material for bridging cracks in substrate or cracks due to shrinkage, up to 2mm width. Davco K11 Panel Pruf can be skimmed, plastered and tiled on directly without any reduction in its bond strength.

USES

  • Apply on internal and external surface of precast panel wall and slab, and sealing of precast joints

ADVANTAGES

  • Low VOC, Water based and Non-toxic
  • Good flexibility and adhesion to various substrate
  • Seals lightweight aerated blocks
  • Seals precast joints
  • Anti-carbonation protection
  • Will not attack metal

Cementitious Waterproofing (K11 Flex Ocean Blue) – DAVCO

Davco K11 Flex Ocean Blue is a premium grade, highly flexible, cementitious waterproofing system with high elongation for waterproofing substrates prone to movement and cracking.

Davco K11 Flex Ocean Blue is a two-component product composed of a cementitious powder and solvent free liquid. Its distinctive Ocean Blue tone makes it easy to ensure that the Davco K11 Flex Ocean Blue is adequately applied over the entire application area. With good adhesion to many substrates, and high flexibility for superior crack bridging capabilities, Davco K11 Flex Ocean Blue can be used as a repair material for bridging cracks in substrate or cracks due to shrinkage, up to 2mm width.

Davco K11 Flex Ocean Blue can be skimmed, plastered and tiled on directly without any reduction in its bond strength.

USES

  • Apply on internal and external surface of precast panel wall and slab, and sealing of precast joints

ADVANTAGES

  • Low VOC, Water based and Non-toxic
  • Colour Blue for easy verification of application area coverage
  • High Elongation with crack bridging properties
  • Good adhesion to various substrate.
  • Seals lightweight aerated blocks
  • Anti-carbonation protection
  • Will not attack metal

Repair Mortar (Duracrete ECO) – LANKO

Lanko Duracrete ECO is a high performance, repair mortar for reinstating the integrity of the concrete slab. Lanko Duracrete ECO is a polymer modified cementitious repair mortar which is specially formulated for spalling concrete repair. It allows for thick overhead application of upto 50mm to reduce installation time and increase on site productive and its non-shrink properties minimizes surface cracks. Lanko Duracrete ECO is an environmentally friendly repair product which is specially formulated for lower embodied carbon footprint, and is certified by authorized eco labelling authorities as a sustainable building material.

USES

  • As a repair medium for concrete or cementitious surfaces damaged by chemical erosion, impact or spalling cause by corrosion of reinforcement.
  • Lanko Duracrete ECO can be use as bedding for installation, angle fillet, patching cracks in areas that is subjected to minor movement.
  • It can also be used for plastering and screeding of worn concrete surfaces.
  • As a repair medium for concrete or cementitious surfaces damaged by chemical erosion, impact or spalling cause by corrosion of reinforcement.
  • Lanko Duracrete ECO can be use as bedding for installation, angle fillet, patching cracks in areas that is subjected to minor movement.
  • It can also be used for plastering and screeding of worn concrete surfaces.

ADVANTAGES

  • Thixotropic: Allows easy trowel application thereby enabling high build application thickness up to 50mm thick in both vertical and horizontal situations.
  • Simple to use: Materials are prepacked, and ready to use by adding of water on site.
  • Non-shrink: Upholds high bond strength to substrate, no debonding from attached surfaces, and minimize surface cracks.

Bitumen Emulsion K10 BITKOTE 3 – DAVCO

Davco K10 Bitkote 3 is an easy to use, water based bitumen waterproofing emulsion that has been specially formulated to be non-toxic and fast drying. After application, it forms a seamless and flexible bitumen membrane with high adhesion strength that is ideal for covering of cracks and general waterproofing purposes.

USES

  • Ground slabs and walls
  • Toilets and plaster box
  • Roof decks
  • Landscape deck
  • Concrete, masonry, asbestos and metal substrate.

ADVANTAGES

  • Fast drying, dries in less than 2 hours
  • Non-toxic
  • High elongation
  • High adhesion strength
  • High tensile strength
  • Ease of application

Rockfil (Internal) ECO – DAVCO

Davco Rockfil ECO is a premium grade, polymer based joint and internal skimming compound that is available in both powder and paste form. Its unique cement free formulation and eco-friendly packaging reduces the product’s carbon foot print making it an environmentally friendly, all-purpose joint compound.

Davco Rockfil ECO in powder form only requires the addition of water on site to give a smooth and homogeneous paste when mixed with an electric mixer. Davco Rockfil ECO in paste form is ready to use direct from pail.

USES

  • Davco Rockfil ECO is ideal for smoothening the surfaces of masonry plastered wall prior to painting.
  • It is also suitable for use on textured wall boards, laminated wall board, old plastered wall and gypsum wall board. After curing, Davco Rockfil ECO gives a smooth and hard surface which can be sanded down when required. After mixing, excess Davco Rockfil ECO can be stored in a plastic pail for next day application, minimizing product wastages on site.

ADVANTAGES

  • Environmentally friendly and non toxic.
  • Gives a hard surface which can be smoothened by sanding.
  • Can feather edge.
  • Quick drying with high bond strength.
  • Excess product can be stored after mixing, reducing product waste.

Rockfil (External) ECO – DAVCO

Davco Rockfil (External) ECO is a moisture resistant joint and skimming compound that is specially formulated for external application. Its unique cement free formulation and eco friendly packaging reduces the product’s carbon foot print making it an environmentally friendly, all purpose joint compound.

Davco Rockfil (External) ECO is available in paste form and is ready to use direct from pail.

USES

  • Davco Rockfil (External) ECO is ideal for smoothening the surfaces of masonry plastered exterior wall or as joint compound for drywall exterior, prior to painting. It is also suitable for use on textured wall boards, laminated wall board, old plastered wall and gypsum wall board. After curing, Davco Rockfil (External) ECO gives a smooth, weather resistant and hard surface which can be sanded down when required.
  • After mixing, excess Davco Rockfil (External) ECO can be stored in a plastic pail for next day application, minimizing product wastages on site.

ADVANTAGES

  • Moisture resistant
  • Environmentally friendly and non toxic.
  • Gives a hard surface which can be smoothened by sanding.
  • Can feather edge.
  • Quick drying with high bond strength.
  • Excess product can be stored after mixing, reducing product waste.

PrimeMix 99 ECO – S3

PrimeMix 99 is a prepacked proprietary cement-sand plaster/mortar that replaces the traditional on-site mixed of cement and sand. It is specially formulated with plasticizing additives to reduce shrinkage and to give a durable mortar.

USES

  • Plastering to concrete surfaces and brick walls
  • Bricklaying and hollow-block laying
  • Backing for wall tiles
  • Non-structural repair and patching works
  • Suitable for both interior and exterior applications.

ADVANTAGES

  • Convenient and easy to use
  • Reduce shrinkage
  • Eliminates cracks and debonding

Panel WP Skim (External) – DAVCO

Davco Panel WP Skim (Ext) is a water resistant, environmentally friendly, skim coat, that is specially formulated to be trowelled or sprayable for increased productivity.

Davco Panel WP Skim (Ext) can be applied up to 15mm thick, on vertical surfaces of concrete or panel walls using an airless spraying machine or trowel.

USES

  • Application of Davco Panel WP Skim (Ext) is suitable for all types of concrete substrates such as lightweight concrete slabs, panel, walls, columns and beams.
  • Davco Panel WP Skim (Ext) can also be applied on lightweight autoclaved aerated blocks, blockwall and plastered surfaces.

ADVANTAGES

  • Can apply up to 15mm in total thickness.
  • Eliminates the need for plastering before skimming.
  • Water resistant, making it ideal for external application.
  • Easy to apply and sprayable.
  • Increases productivity and saves on manpower.
  • Environmentally friendly and non toxic.

Skimplas ECO – DAVCO

Davco Skimplas ECO is an environmentally friendly cementitious skim coat plaster with a lower embodied carbon footprint.

Davco Skimplas ECO is approved by the Eco-labelling authority in Singapore as a sustainable building material.

Davco Skimplas ECO provides a smooth and durable surface that can be brush or trowel finished. It yields a homogeneous paste by simply adding water and mixing with a mechanical mixer, giving good workability on both vertical and overhead surfaces.

USES

  • Davco Skimplas ECO is ideal for skimming onto most types of concrete substrate like lightweight concrete slabs, plastered wall surfaces and ceilings

ADVANTAGES

  • Environmentally Friendly and non-toxic.
  • Premixed to ensure good consistent quality.
  • Ease of use, mixing and application made easy.
  • Covers hairline cracks.
  • High bonding strength.

Bonding Agent (DW 1) – DAVCO

Davco DW 1 is a synthetic, latex based mortar additive designed for use with portland cement and sand to prepare high strength, thin set mortars. Ideal for installing ceramic tiles, marble, slate and natural stone onto concrete, cement render, rendered brickwork surfaces or over existing tiles.

USES

  • Davco DW 1 may be used as a mortar additive for fixing ceramic tiles, pavers, marble, slate and natural stone onto concrete, cement render, blockwork and rendered brickwork surfaces.
  • Can be used in conjunction with sand and cement as a splash coat to fix render, or bed tiles over uneven concrete.
  • Can also be used as an additive to strengthen cement render coats.
  • Can also be used as a grout additive, especially in straight sand cement grouts. In conjunction with sand / cement can be used to tile over existing tiles.
  • Can be used as latex binder in thick bed mortar fixing.
  • Can be used as an injection repair for bonding hollow plaster and floor screed.

Premium Latex (LANKO 1000) – LANKO

LANKO 1000 Premium Latex is a high performance, environmentally friendly water based, synthetic resin emulsion which significantly improves the performance of tile adhesives and mortar.

USES

  • Scratch coats.
  • Cement-based coats or lime plaster finishes.
  • Waterproof coats for shaft linings, reservoirs, retention tanks and swimming pools.
  • Bonding and waterproofing of plaster coats.
  • Cast cement screed, without need for picking up.
  • Built-in screed.
  • Admixed screed for tiled flooring.
  • Rendering and reshaping mortar.
  • Bridging mortar for construction joints.
  • Mortar for laying prefabricated elements.
  • Pointing and caulking mortar for a variety of joints : masonry, chimney stacks, flashing.
  • Repairs to concrete flooring.

ADVANTAGES

  • Bonds mortar and concrete, even on smooth substrates.
  • Waterproofs mortar and increases resistance to oil, grease, fuel and diluted acids.
  • Reduces the modulus of elasticity and improves mortar resistance to tension, abrasion and impact.
  • Enables the creation of structures intended to be in contact with water and sea water (using a suitable cement).
  • Reduces shrinking, crazing and chalking.
  • Mortar containing LANKO 1000 Premium Latex is safe and completely harmless and can be used with foodstuffs.

Cornice Adhesive – APLAS

APLAS Cornice Adhesive is a versatile polyment modified plaster based adhesive, designed for adhering fibrous plaster cornices and other decorative fibrous plaster pieces to cement rendered surface, and reinforcing cornice joints. This cornice adhesive has rapid soaking qualities and rapid fixing procedure, thus retaining consistency and smoothness during work time.